Anyone could give me a feedback? I am very much appreciated with you email. I check PCI spec(any version). I found DC spec of PCI 3.3V signaling ,Vih is defined to be 0.5Vcc and another table show 0.6Vcc(see table4-7,measure condition parameters) after i check some PCI device's ibis model,it show Vih is 2.0V i am confused now.which value shoud be taken into timing caluculation correctly? KEVIN hou High Speed Signal Design Division RD7 , PSBU MiTAC Computer Inc. * 886-3-396-2888 Ext. 6751 * 886-3-327-7262 * houkevin@xxxxxxxxxx <mailto:houkevin@xxxxxxxxxx> _____ <http://promos.hotbar.com/promos/promodll.dll?RunPromo&El=hotbar%5felement%3 bst%3b&SG=&RAND=93267> Upgrade Your Email - Click here! ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu