[SI-LIST] Using Scattering Parameters with PSPICE

  • From: "Michael Smith" <michael@xxxxxxxxxx>
  • To: <si-list@xxxxxxxxxxxxx>
  • Date: Fri, 31 Oct 2003 11:11:06 -0800

Hi,

I am wondering what is the simplest way to utilize an s2p scattering
parameters file for an inductor in Orcad PSPICE?  There doesn't seem to
be a built in function.  

Thanks,

Michael Smith
iZ Technology Corp.
Voice: (604) 395-7878 ext. 314
Fax: (604) 395-7888



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts:

  • » [SI-LIST] Using Scattering Parameters with PSPICE