[SI-LIST] Stub length of a clock

Dear SI expert,

I have two loads that I need to support with one clock. I route the clock from 
the generator to half way between the loads and T off to stubs each going to 
its target load. I know that the stub needs to be minimize but I can only make 
so short. Transmission line theory suggest there is a relationship between the 
stub length and signal rise time? does any know this relation or can point me 
to an article.

Thanks

Hura


arag abu deeb


---------------------------------
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: