[SI-LIST] Re: Standard for thermal relief on thru hole pins

From: "Gary Thompson" <gary@xxxxxxxxx>
To: <si-list@xxxxxxxxxxxxx>
Date: Tue, 20 May 2003 15:43:37 -0500

Thanks to all who replied. I got a copy of IPC-2222, and it looks like
just what I needed.

Sure enough, the CM wants about half the copper the IPC spec allows.
We'll have to do some "negotiating."


===============================================================
Gary Thompson                            email:  gary@xxxxxxxxx
Agere Systems                            phone:  (512) 821-6521
Processing, Aggregation, and Switching   mobile: (512) 751-8115
                                         FAX:    (512) 821-6810
===============================================================

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

References:

[SI-LIST] Re: Standard for thermal relief on thru hole pins
From: Salkow, Steven

[SI-LIST] Re: Standard for thermal relief on thru hole pins

Other related posts: