Hi, I could see in some documents, the SSO simulation set up for SSTL2 interface is like below. I want to know whether the schematic below represents the correct simulation set-up for SSTL2 quite node SSO simulation. I tried inserting transmission line between Rser and Cload-Rt junction. But I get very different values of noise compared to the results of provided in the doc, using the below set-up. Could anyone explain which is correct method and how the schematic below can represent the T.Line effectd. VTT ____ | | / \ Rt / \ ------------ ---------- | | | | | Rser | | Driver |-------| Pkg | ------------/\/\/\/\/\/\----------| | | | model | | | | | | | ------------ ------------ | ==== Cload | | | _____ __ - Regards Canes __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu