Hi, I am facing some problem in the SDRAM data lines. The problems are whenever I am running more then 115MHz SDRAM read and write test is failing. I connected logic analyzer to probe the signal then tests are passing. In PCB SDRAM is placed very close to the ASIC. I do not know the problem is due to the capacitance or ground. I gave sufficient ground plane under the device. If any one knows the solution please help me. Thanks, Sankar.K Wipro Technologies, 72, Electronics City, Hosur Main Road, Bangalore-561229. Ph:+91-80-8520408 Extn: 4012/4031. **************************Disclaimer************************************ Information contained in this E-MAIL being proprietary to Wipro Limited is 'privileged' and 'confidential' and intended for use only by the individual or entity to which it is addressed. You are notified that any use, copying or dissemination of the information contained in the E-MAIL in any manner whatsoever is strictly prohibited. *************************************************************************** ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu