[SI-LIST] Regarding DFM

Dear all,
            Can anybody clarify the following .
            What should be the minimum track width for the PCB with copper 
thickness of 70micron. Any standard rule available. Kindly know the link.
Regards
G.Ganesh Kumar
Engineer - R & D
(A Unit of HCL Infosystems ltd.)
HCL Peripherals
299, Arcot road, Vadapalani,
Chennai - 600026 INDIA
Tel - 24800156, 24725375, 24727088
       24843566, 24838316
Fax - 91-44-24834563
Email : ggkumar@xxxxxxxx


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: