Alin, as Brad said you should look to get some help from Ansys. You will also need the geometry limits of the bond wires. This is where the most variability usually occurs. Steve. Alin Razafindraibe wrote: > Hi All, > I need to extract all parasitics of a package with wirebonding dedicated to > RF application. > > Today I have the DXF of the package and a GDS of both pinout and bonding. > > The only one tool available is HFSS and I use to use Paksi-E ( Apache-DA ). > > So I wonder if with all these input data I will be able to extract all > parasitics with HFSS? > > I will be interested If anyone has a quick tutorial about how to do. > > Regards > > Alin > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > > -- Steve Weir IPBLOX, LLC 150 N. Center St. #211 Reno, NV 89501 www.ipblox.com (775) 299-4236 Business (866) 675-4630 Toll-free (707) 780-1951 Fax ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu