Hello Friends, I need some help in my analysis of a problem listed below, I am working on a product for a graphic application using an ADC with a built-in PLL (clock for digitization of Video). During a vibration test on the board we found out that the image shakes and we fixed everything we suspected from loose cable to loose components with no success. Finally, based on some expert advise.. I was told that the problem could be caused due to mechanical stress on the loop filter capacitor which may be causing the capacitance to change during vibration and thereby disrupting the PLL. Has anyone faced similar issues? I would appreciate your expert feedback. Thanks, Girish ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu