[SI-LIST] Re: PCI-spec question
- From: "Gil Gafni" <scubasnail@xxxxxxxxxxx>
- To: <bill.panos@xxxxxxxxxxxxxxx>
- Date: Thu, 21 Nov 2002 09:24:58 -0800
Bill,
The recommended thickness is .062" (62 mils) per the 2.2 spec (see attached
.doc)
Please mind that the "connector" on the PCB is traces covered with (mostly)
Gold.
What you want to do is to consult your PCB manufacture for how to achieve
this thickness, taking in count the trace and any coating you will apply on
it.
Good luck.
Gil
----- Original Message -----
From: "bpanos" <bill.panos@xxxxxxxxxxxxxxx>
Cc: <si-list@xxxxxxxxxxxxx>
Sent: Wednesday, November 20, 2002 5:09 PM
Subject: [SI-LIST] PCI-spec question
> Does anyone know the allowable PCB board thickness is with respect to the
32
> bit PCI local bus?
>
> thanks
> Bill
>
>
>
>
> -- Binary/unsupported file stripped by Ecartis --
> -- Type: text/x-vcard
> -- File: bill.panos.vcf
> -- Desc: Card for bpanos
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> //www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List archives are viewable at:
> //www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
