I am trying to use SigXplorer for a PCI reflected wave switching. I am comparing the waveform of the SigXplorer and the hspice at the TRANSMITTER. Although the waveforms at the receiver look similar, the waveform at the transmitter in the SigXplorer looks different and unexplainable. I expect the initial voltage at the tranmitter to be Vo = Vcc*Zo/(Zo+R) where R is the sum of the drive strength and the series termination resistance and is equal to Zo. Thus, I expect it to be 1.65V ( 1/2 of 3.3 V) and I am getting 1.65V in hspice. But in SigXplorer, I am am getting it about 2.58V. Can anyone try any PCI clock or data and confirm is it so and why ? For example try Texas Instrument ibis model for 33 MHz Clock Driver CDC960 model CDC960_T5 ( it can be downloaded from TI website). ____ / \ __/ \__ ____ 2.58V / \ / \ / \ / \ SigXplorer waveform at Transmitter ____ / \ / \ __/ \__ ____ 1.65 V / \ / \ / \ HSpice waveform at Transmitter VS __________________________________ Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! http://promotions.yahoo.com/new_mail ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu