[SI-LIST] Re: How to measure the resistance between handle and panel
- From: "Ingraham, Andrew" <Andrew.Ingraham@xxxxxx>
- To: "si-list" <si-list@xxxxxxxxxxxxx>, <zhang_kun@xxxxxxxxxx>
- Date: Fri, 6 Dec 2002 08:40:57 -0500
Can't you just measure the DC resistance?
If it's a simple matter of the handle not mating, then DC resistance
ought to tell you that.
Andy
> I am doing some work about EMC. I find out that if the handle and the
> panel is not connected closely, the handle will be antenna for it is
> isolated. The EMI will be very critical. The panel is connected to
> PGND. I want know how to measure the AC impedance between the handle
> and the panel.
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
