[SI-LIST] Re: How to couple noise to the PDN of oscillator

A transformer can match impedance, but your power levels will likely be 
wanting.  You can raise the impedance of the oscillator PDN connection 
to ease this problem.  You can also use an RF power amplifier.

Steve.
Zhangkun wrote:
> Dear all
>  
> Now we are studying the effect of power noise on jitter. We meet a problem,
> how to couple noise to the PDN. For example, we want to couple noise of
> 25MHz into the PDN of oscillator. However there is impedance dismatch. The
> impedance of signal source is about 50ohm and that of PDN is about 0.1ohm.
> The energy would be reflected.
>  
> Any advice would be helpful
>  
> Best Regards
>  
> Zhangkun
> 2008.5.14
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List technical documents are available at:
>                 http://www.si-list.net
>
> List archives are viewable at:     
>               http://www.freelists.org/archives/si-list
> or at our remote archives:
>               http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
>               http://www.qsl.net/wb6tpu
>   
>
>
>   


-- 
Steve Weir
Teraspeed Consulting Group LLC 
121 North River Drive 
Narragansett, RI 02882 

California office
(866) 675-4630 Business
(707) 780-1951 Fax

Main office
(401) 284-1827 Business 
(401) 284-1840 Fax 

Oregon office
(503) 430-1065 Business
(503) 430-1285 Fax

http://www.teraspeed.com
This e-mail contains proprietary and confidential intellectual property of 
Teraspeed Consulting Group LLC
------------------------------------------------------------------------------------------------------
Teraspeed(R) is the registered service mark of Teraspeed Consulting Group LLC

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: