[SI-LIST] How to convert Hspice model

I recently requested an IBIS model for a part made by Vitesse.
Vitesse responded by sending a Hspice model and said that IBIS does not 
work well at 3 Gbps.
I am using Hyperlynx simulator. It can co-simulate with Hspice but we do 
not have Hspice simluator.
Hyperlynx can simulate using the following models: .EBD, .IBS, .PML, 
SPICE, S-Parameter (Touchstone).
I have seen programs that convert Hspice to Ibis but I am not sure if I 
will loose the high frequency modeling of the Hspice file.
I would appreciate any suggestions on how to handle this Hspice spice 
model without having an Hspice simulator.


-- Binary/unsupported file stripped by Ecartis --
-- Type: text/x-vcard
-- File: joel.vcf


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: