[SI-LIST] Re: Copper balancing

Hi,
Normally a copper pour with hatch pattern is used for copper balancing .
Mentor has FABLINK LX tool , check out 

Makarand Kanade
Software Engineer
EmSyS Division,
Larsen & Toubro Limited.
KIADB Industrial Area, Hebbal
Hootagalli, Mysore - 570 018
Ph:  +91-821-2402561  Extn:2734
Fax : +91-821-2403752

Corporate website : www.lntemsys.com



"Vigneshwara Upadhyaya" <vigneshwara.upadhyaya@xxxxxxxxxxxx> 
Sent by: si-list-bounce@xxxxxxxxxxxxx
05/31/2006 03:11 PM
Please respond to
vigneshwara.upadhyaya@xxxxxxxxxxxx


To
<si-list-bounce@xxxxxxxxxxxxx>, "si-list" <si-list@xxxxxxxxxxxxx>
cc

Subject
[SI-LIST] Copper balancing






Hello everyone,
 

We are designing an 8-layer board in that some parts of each layer is
highly dense and some part have no tracks at all.

Is there any standard methodology for balancing the copper etching?

Any tech paper which explains how the copper balancing is done??

 

Thanks

Vignesh





********************** Legal Disclaimer ****************************
"This email may contain confidential and privileged material for the sole 
use of the intended recipient.  Any unauthorized review, use or 
distribution by others is strictly prohibited.  If you have received the 
message in error, please advise the sender by reply email and delete the 
message. Thank you."
**********************************************************************


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at: 
                                 http://www.freelists.org/archives/si-list
or at our remote archives:
                                 
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                                 http://www.qsl.net/wb6tpu
 




------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: