[SI-LIST] Copper balancing

Hello everyone,
 

We are designing an 8-layer board in that some parts of each layer is
highly dense and some part have no tracks at all.

Is there any standard methodology for balancing the copper etching?

Any tech paper which explains how the copper balancing is done??

 

Thanks

Vignesh





********************** Legal Disclaimer ****************************
"This email may contain confidential and privileged material for the sole use 
of the intended recipient.  Any unauthorized review, use or distribution by 
others is strictly prohibited.  If you have received the message in error, 
please advise the sender by reply email and delete the message. Thank you."
**********************************************************************


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: