[SI-LIST] Board to Board connetcions using Coax cables

HI All,

could any one have info on coax cables (50 ohms) which can be used to
connect from one board to another. 

the signals i am interconnecting are LVDS signals working at 622 Mhz. 
this is a sort of experimental setup where the mother board and a piggy back
board are to be interconnected and both are designed for 50 Ohms.
i wont be having luxury of any connectors on board (this is tapped from vias 
on board. but the vias are balanced across the diff pair). 

it would be great if anyone could give me a spec / part datial for the cable..

thanks in advance
sreejith


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: