You may want to check out: http://www.goreelectronics.com/products/pdf_files/cable_asy_2mm_VHDM_HSD.pdf see if that's close to what you need. Doug -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of Sreejith Varma Sent: Wednesday, July 11, 2001 5:46 PM To: 'si-list@xxxxxxxxxxxxx' Subject: [SI-LIST] Board to Board connetcions using Coax cables HI All, could any one have info on coax cables (50 ohms) which can be used to connect from one board to another. the signals i am interconnecting are LVDS signals working at 622 Mhz. this is a sort of experimental setup where the mother board and a piggy back board are to be interconnected and both are designed for 50 Ohms. i wont be having luxury of any connectors on board (this is tapped from vias on board. but the vias are balanced across the diff pair). it would be great if anyone could give me a spec / part datial for the cable.. thanks in advance sreejith ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu