[SI-LIST] Any basic idea about on-chip clock skew detection?
- From: "Yiran Chen" <cyr_1976@xxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Mon, 18 Oct 2004 15:29:04 -0000
Hi, guys
Do you know how to measure two clock signal's skew by using some on-
chip method? Such as circuit and so on? If not, how could we do it
offchip? need two pin and two same-length wires or...?
Many thanks.
Yiran
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
