[racktables-users] Re: SNMP for F5 Devices
- From: Jason Hamilton <jason@xxxxxxxxxxxxxxxxxx>
- To: "racktables-users@xxxxxxxxxxxxx" <racktables-users@xxxxxxxxxxxxx>
- Date: Fri, 22 Mar 2013 07:08:19 -0400
Yeah, this I know.....but I meant as far as editing the snmp file in
Racktables so that I can sync data without getting the dreaded "unknown
oid" error.
On Thu, Mar 21, 2013 at 11:59 PM, Jonathan Thurman <jonathan@xxxxxxxxxxxxxxx
> wrote:
> On Thu, Mar 21, 2013 at 5:26 PM, Jason Hamilton
> <jason@xxxxxxxxxxxxxxxxxx>wrote:
>
>> Hi Racktables Users,
>>
>> I was wondering if anyone out there figured out the snmp oids for F5
>> devices. Specifically I'm looking for the newer 2000 series but I'm sure
>> any of the LTM line would at least give me somewhere to start.
>>
>
> If you have an F5 device, you can download the MIBs directly from the
> Configuration Utility. Here is a kb article describing how (F5 support
> login required):
>
> https://support.f5.com/kb/en-us/solutions/public/13000/300/sol13322.html
>
> The MIBs are based on the version of BIG-IP software, and what feature set
> you are using (LTM, GTM, APM, etc). Since they all run the same software,
> the hardware really only speaks to the capacity of the device.
>
> -Jonathan
>
>
--
-- Jason
Other related posts:
