Yes, electrical use is very important for provisioning and VMWARE infraestructure is the same. I will collaborate in expand for new features. Atte JSD 2010/4/17 Michael Camino <mikeyc@xxxxxxxxxxxxxx> > Hello All, > I have been using the rack tables software for almost a year now to > manage a data center and I am looking to extend the software features in a > couple ways. I have read the archive and have not found the exact answers I > am looking for. I read a lot of previous posts which talk about changes > people may have made but i do not see any of their code added to any of the > development branches or any specific code changes being posted to the list. > If i am incorrect please feel free to correct me and point me in the right > direction. > > The first feature I am looking to add is the ability to handle patch panels > and be able to see through to the other end of it. Right now our users > select an available switch port on our switches and we cable up between > their rack location and the patch panel and switch ports. It would be great > if they could select a patch panel port located in their rack and then > select the end port on a switch. Then my job would only be to put the cables > where they selected. I know about mounting a patch panel in 2 racks, and > that gets me 1/2 way there. What it doesn't let them do is have 2 devices , > one server and one switch port, connect to that same patch panel port. It > also doesn't allow them to see the "end port". > > The second feature is a reporting one.In each of our racks we have two or > four PDU's. For each of our server objects we have 2 custom fields one for > BTU and one for Watts. I would like some way to build reports based on PDU > electrical usage. So if we have 5 devices each pulling 500 watts from PDU-A > and two devices pulling 700 watts from PDU-B i am looking for some way to > create or view a report which says the amount of theoretical wattage being > used on each pdu compared to the input wattage, then per rack, and then in > the whole data center. I have the pdu's setup with 8 AC-OUT ports and 1 > AC-IN Port but no way of combining connected devices onto the same pdu via > the mysql database. > > The third feature I am looking for is some thoughts on VMWARE and Rack > tables. Obvious virtual infrastructure is something which might be out of > the purpose of a software design for physical reporting. I understand that. > What i am looking for is some suggestions on how other members might be > doing this. > > > > >