Hi All, We're using RT 0.20.4. In our network we have more than 1700 routers. All of them al documented within RT. At some point we wanted to document as well the VRFs that reside inside some of those. Documenting VRFs is important since each of those have as well interfaces and IP addresses and we're also taking care of the VPNs. In order to do so, we did the following: 1) Create the VRF object Main page : Configuration : Dictionary : Chapter 'ObjectType' 2) Once the object is created when then made a child of the type Router Main page : Configuration : Object container compatibility 3) Once the object is created and assigned a parent, we created the attributes RouteTarget (RT) and RouteDistinguisher (RD) and assigned those to the newly created VRF object Main page : Configuration : Attributes 4) We also allowed IP addresses to be included inside the VRFs. Just add the object id to the parameter IPV4OBJ_LISTSRC inside the configuration. Main page : Configuration : User interface 5) Once you create a new VRF then you need to select who is its parent. To do so, you need to go the object's properties tab, and select the appropriate container. So, this mail was not written to ask any question or something, just wanted to share with you something that might be helpful and is certainly making our life easier. In any case, if you have a better approach, please share it with us. Regards, Lucas -- "Antes teníamos hambre y mirábamos el reloj para saber qué hora era. Ahora miramos el reloj para saber si tenemos hambre." -- Ernesto Sábato