Denis, I would like a ask for a small request... If at all possible, in the view portion of the Cisco switches, could you include the port description that is defined on the port itself. ports and links Local name Visible label Interface L2 address Remote object and port con0 console RS-232 (RJ-45) gi0/1 gi0/1 1000Base-T 00:17:95:E5:4B:01 co-ps-scom-a02 <http://co-wan01.cps.k12.il.us/racktables/index.php?page=object&object_id=221&hl_port_id=806> eth1 gi0/2 gi0/2 1000Base-T 00:17:95:E5:4B:02 co-ps-scom-a04 <http://co-wan01.cps.k12.il.us/racktables/index.php?page=object&object_id=222&hl_port_id=809> eth1 If possible to add a column or replace the interface to that is displays the description from the switch. co-3bi0715-asw01#show int Gi0/1 GigabitEthernet0/1 is up, line protocol is up (connected) Hardware is Gigabit Ethernet, address is 0017.95e5.4b01 (bia 0017.95e5.4b01) Description: Private VLAN Port ç Please display this.... MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) ... Thanks, Luis