[pure-silver] Re: pure-silver Old roll of E6
- From: Eric Nelson <emanmb@xxxxxxxxx>
- To: "pure-silver@xxxxxxxxxxxxx" <pure-silver@xxxxxxxxxxxxx>
- Date: Tue, 20 Aug 2013 19:41:13 -0700 (PDT)
If you can maintain, while agitating, 100° temps in your trays for the duration
then they are usable. The chemistry is 1 shot.
________________________________
From: Bob Younger <ryounger@xxxxxxxxx>
To: pure-silver@xxxxxxxxxxxxx
Sent: Wednesday, August 21, 2013 5:21 AM
Subject: [pure-silver] Re: pure-silver Old roll of E6
Mark,
Would that work for 8x10 in a tray? Or would I need tubes?
Thanks,
Bob Younger
On Tue, Aug 20, 2013 at 1:00 PM, Sauerwald Mark <mark_sauerwald@xxxxxxxxx>
wrote:
>
>Mark
>
>
>I have had good luck using the tetanal kit for E-6, but it does require
>processing at a quite high temp. For one roll, I would probably send it out
>- I use the Tetanal kit as one-shot, and develop ~10 rolls of 120 with one 1L
>kit in my Jobo.
>
>
>Mark
>
>
>
>________________________________
>
>
>From: <mark@xxxxxxxxxxxxxxxxxx>
>Subject: [pure-silver] Old roll of E6
>Date: Mon, 19 Aug 2013 20:17:19 -0700
>
>Ok this one is a bit odd.. Found an old roll of slide film = today. It
>wasstuffed in a bag and I have no idea where it came from.= It could be a
>roll I took and the wife in packing "combined" ie move= d it outside of its
>normal place and neither of us noticed it was there.&nb= sp; It might be a
>roll that I didn't even take from a move of
either of our= parents. Not
>likely mine, but might be hers or her mothers brother t= hat took it.
>I see no date on it. I al= so see no dx code on it either. Its Kodak
>Ektachrome 64 ER 135-= 20. What is weird to me is that its a 20 roll
>exposure of film.= Maybe I have, but I have bought film in 24 and 36, but
>honestly don'= t remember a 20 roll. Yes I have used short rolls of 8. Yet
>I d= on't remember the 20 roll, but then again I am not as young as I used
>tobe= .
>I do have a couple of hunches on what it might = be. One or two of them
>might be priceless to me. Getting E6 don= e here is tougher than it once
>was. Most places are shipping it somew= here and if this is going to be
>doneby anyone, it will be done in the same= building I am leaving it at. No
>transport of any kind any where.&nbs= p; Been there done that, they
have
>lostthat. Ordered a kit today to = process it myself if need be. Any
>adviseand or information would be = appreciated. Thank you in advance.
>Mark
>
>------------------------------
>
>End of pure-silver Digest V1 #19
>********************************
>
>
>
>
Other related posts:
