Hi, I made some 16x20 b&w prints with a 4x5 Beseler/cold light enlarger from 35 negs with the Leitz V-Elmar 100mm lens. The baseboard was removed and the projected image on the floor. It was easier to use the motor up/down to focus while scoping the grain magnifier than the focus wheel because of the reach! But the longer focal length makes a big difference in an even illumination. It also means the lens is only being utilized in the center, so corner lens corrections are not an issue. Best, Rich ============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.