RE: Dynamic and condenser microphones on the plextalk

  • From: "Jamie Cuthbertson" <jamie.cuthbertson@xxxxxxxxxxxx>
  • To: <ptr1-users@xxxxxxxxxxxxx>
  • Date: Mon, 17 Nov 2008 10:43:29 -0000

Andre,

I can't give you a personal opinion in terms of comparing a condenser mike
with a dynamic mike but would say that, in my opinion, the best recording
results I've had have been using a condenser mike and recording onto the CF
card using the line in jack with a pre-amp.  If I then need a CD copy, I use
the backup process after doing any editing that's required.

I've always found that, if you record direct onto a CD there is often a
faint squeaking sound ends up on the final recording.

Hope this helps.

Jamie


-----Original Message-----
From: ptr1-users-bounce@xxxxxxxxxxxxx
[mailto:ptr1-users-bounce@xxxxxxxxxxxxx] On Behalf Of André van Deventer
Sent: 17 November 2008 05:19
To: ptr1-users@xxxxxxxxxxxxx
Subject: Dynamic and condenser microphones on the plextalk


Hi all

Just want to find out if I am correct here.

It does seem as if the plextalk ptr2 seem to work better with an external
condenser microphone than with a dynamic microphone?  I have a reasonably
good quality sennheiser dynamic microphone  I tested with the ptr2.  I found
that in order to get reasonable results, I had to turn up the recording
level up to full.

I would be most interested to hear what other people's experiences are
regarding using external microphones with the plextalk.

Regards

Andre


No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.549 / Virus Database: 270.9.4 - Release Date: 2008/11/14 12:00
AM
 

---------------------------------------------------------------------------
To leave the list at any time, please write to
<ptr1-users-request@xxxxxxxxxxxxx> with unsubscribe ptr1-users in the
subject or the body.  The list home page is at
<//www.freelists.org/list/ptr1-users/>.

---------------------------------------------------------------------------
To leave the list at any time, please write to 
<ptr1-users-request@xxxxxxxxxxxxx> with unsubscribe ptr1-users in the subject 
or the body.  The list home page is at 
<//www.freelists.org/list/ptr1-users/>.

Other related posts: