PI4TUE is up again. We did not manage to swap SSB and CW filters in the IC756 as the connections of the 9 MHz filters are different, and I did not want to glue the cw filter to the board and connect it with wires :) One of those cases of 'we know what's good for you, you will never need to use a 250 Hz filter on SSB'. Sort of like Micro$oft in Hardware... So everything is back to where it was, using the 2.4 kHz filter with the DSP at max cutoff hi and low. 1 afternoon lost, 1 insight gained. 73, Rein PA0R (yes, I also tried split and memory, cross mode is blocked as well.) > -----Ursprüngliche Nachricht----- > Von: pskmail@xxxxxxxxxxxxx > Gesendet: 21.05.07 13:02:18 > An: pskmail@xxxxxxxxxxxxx > Betreff: [pskmail] <kein Betreff> > > PI4TUE will be down for maintence for part of the afternoon, we will try to > get the > 250 Hz filter to work on SSB. Therefore we have to unsolder the SSB filter > and put in the cw filter :) > > So we will be off for a few hours starting 12:00 UTC > > 73, > > Rein Pa0R > > - > http://pa0r.blogspirit.com > > > -- http://pa0r.blogspirit.com