[pskmail] Re: Server issues
- From: John Douyere <vk2eta@xxxxxxxxx>
- To: pskmail@xxxxxxxxxxxxx
- Date: Wed, 28 Mar 2012 08:16:10 +1100
Hi Eric,
Just to make sure, you have 24 lines of frequencies (one or each hour in
the day) followed by one line of mode, USB then Call?
I don't think is makes a difference but in my file I have a comma after the
last element on each line.
Other elements I would check:
1. The file is in the .pskmail/qrg directory in the home folder of the
username used to launch the server.
2. It is readable, or better, owned by that same user.
Hope this helps,
73, John
On 28/03/2012 5:37 AM, "Eric W. Davenport" <kz5ed@xxxxxxxxxx> wrote:
> Rein,
>
> I have been trying to figure this out and this where I am.
>
> It seems that all the exceptions are because $cat is not set correctly by
> $Freqtable.
>
> I have redone my freq.txt a number of times and believe that I have it
> correct.
> 5 frequencies separated by comma no period no comma at end
> Same for Mode
> Same of USB
> Same for Call
>
> I saw a reference to $freqoffset mine is set to 0
>
> Where else could I have messed this up?
>
>
> Eric
>
>
>
>
>
>
> On 3/26/2012 5:57 PM, Rein Couperus wrote:
>
>> Eric,
>>
>> BigEar is only used in Europe. It tries to make sure the servers on 10148
>> (sometimes we have 6 servers there) don't tx on top of each other.
>> As in the US we have only a few servers BigEar looks at the geo location
>> of the server, and yours is outside...
>>
>> 2nd, the error messages show that the server cannot read the config file
>> (the $freq_offset is read from the config file, and when it is not read
>> it is not initialized...).
>>
>> With regard to the fldigi log file, pse look at the fldigi documentation:
>>
>> Rx/Tx Capture File
>> Everytime you start or stop fldigi that event is recorded in a daily log
>> file. The daily log is name as:
>>
>> flidigYYYYMMDD.log
>>
>> where YYYYMMDD is the current GMT date. This log will also contain your
>> entire session of Rx and Tx data annotated as to activity and timestamped.
>> Here is a small example of the daily log:
>>
>> --- Logging started at Tue Dec 30 11:37:21 2008 UTC ---
>>
>> RX (2008-12-30 11:37Z): o ur property. No pwr even for a day is rough.
>> TX (2008-12-30 11:39Z): TX (2008-12-30 11:39Z): CQ CQ CQ de W1HKJ W1HKJ
>> W1HKJ
>> TX (2008-12-30 11:40Z): CQ CQ CQ de W1HKJ W1HKJ W1HKJ pse k
>>
>> RX (2008-12-30 11:40Z): mG sk
>>
>> --- Logging stopped at Tue Dec 30 11:48:11 2008 UTC ---
>> This log is appended to with each start and stop. That means that no
>> data is ever overwritten.
>>
>> The problem here is that the log file name changes every time you
>> start/stop fldigi.
>> Some people link the dayly log to 'fldigi.log'.
>>
>> Hope this helps,
>>
>> Rein PA0R
>>
>>
>> Hi All,
>>>
>>> I am having some server issue's that I am sure are related to something
>>> easy.
>>>
>>> I have been through the manual and the sample pl files and I think I
>>> have every correct but this log tells me I do not.
>>>
>>> 12:03 UTC Mar-26-2012: Program start
>>> 12:03 UTC Mar-26-2012: Connected to rotate.aprs.net port 1314
>>> POS=35N:082W
>>> Outside BigEar geo area...
>>> BigEar serverport:10148
>>> BigEar not available<<< Was I supposed to change this?
>>> Use of uninitialized value $cat in concatenation (.) or string at
>>> /usr/local/share/pskmail_**server/rflinkserver.pl line 252.
>>> Scanning: Offset = 0 minute(s)
>>> Pskmodes:PSK250R,PSK250R,**PSK250R,PSK250R,PSK250R,
>>> .
>>> Use of uninitialized value $cat in scalar chomp at
>>> /usr/local/share/pskmail_**server/rflinkserver.pl line 256.
>>> Use of uninitialized value $cat in split at
>>> /usr/local/share/pskmail_**server/rflinkserver.pl line 257.
>>> Use of uninitialized value in concatenation (.) or string at
>>> /usr/local/share/pskmail_**server/rflinkserver.pl line 5141.
>>> 12:03 UTC Mar-26-2012:
>>> Listening to the radio
>>> initialized
>>> Use of uninitialized value $cat in scalar chomp at
>>> /usr/local/share/pskmail_**server/rflinkserver.pl line 4594.
>>> Use of uninitialized value $cat in split at
>>> /usr/local/share/pskmail_**server/rflinkserver.pl line 4596.
>>> Use of uninitialized value in concatenation (.) or string at
>>> /usr/local/share/pskmail_**server/rflinkserver.pl line 5141.
>>> 12:03 UTC Mar-26-2012:
>>> Send>APRS-IS:KZ5ED-30>PSKAPR:@**261203z3599.33NP08213.11W&**PSKmail
>>> 1.6.0
>>> server
>>>
>>>
> --
> Eric W. Davenport
> Cert-In Software Systems, Inc.
> P.O. 346
> Bakersville, NC 28705
> 800-873-0110
> www.certin.com
>
>
>
Other related posts:
