Rein, I have been trying to figure this out and this where I am.It seems that all the exceptions are because $cat is not set correctly by $Freqtable.
I have redone my freq.txt a number of times and believe that I have it correct.
5 frequencies separated by comma no period no comma at end Same for Mode Same of USB Same for Call I saw a reference to $freqoffset mine is set to 0 Where else could I have messed this up? Eric On 3/26/2012 5:57 PM, Rein Couperus wrote:
Eric,BigEar is only used in Europe. It tries to make sure the servers on 10148 (sometimes we have 6 servers there) don't tx on top of each other. As in the US we have only a few servers BigEar looks at the geo location of the server, and yours is outside...2nd, the error messages show that the server cannot read the config file (the $freq_offset is read from the config file, and when it is not read it is not initialized...). With regard to the fldigi log file, pse look at the fldigi documentation: Rx/Tx Capture File Everytime you start or stop fldigi that event is recorded in a daily log file. The daily log is name as: flidigYYYYMMDD.log where YYYYMMDD is the current GMT date. This log will also contain your entire session of Rx and Tx data annotated as to activity and timestamped. Here is a small example of the daily log: --- Logging started at Tue Dec 30 11:37:21 2008 UTC --- RX (2008-12-30 11:37Z): o ur property. No pwr even for a day is rough.TX (2008-12-30 11:39Z): TX (2008-12-30 11:39Z): CQ CQ CQ de W1HKJ W1HKJ W1HKJTX (2008-12-30 11:40Z): CQ CQ CQ de W1HKJ W1HKJ W1HKJ pse k RX (2008-12-30 11:40Z): mG sk --- Logging stopped at Tue Dec 30 11:48:11 2008 UTC --- This log is appended to with each start and stop. That means that no data is ever overwritten. The problem here is that the log file name changes every time you start/stop fldigi. Some people link the dayly log to 'fldigi.log'. Hope this helps, Rein PA0RHi All, I am having some server issue's that I am sure are related to something easy. I have been through the manual and the sample pl files and I think I have every correct but this log tells me I do not. 12:03 UTC Mar-26-2012: Program start 12:03 UTC Mar-26-2012: Connected to rotate.aprs.net port 1314 POS=35N:082W Outside BigEar geo area... BigEar serverport:10148 BigEar not available<<< Was I supposed to change this? Use of uninitialized value $cat in concatenation (.) or string at /usr/local/share/pskmail_server/rflinkserver.pl line 252. Scanning: Offset = 0 minute(s) Pskmodes:PSK250R,PSK250R,PSK250R,PSK250R,PSK250R, . Use of uninitialized value $cat in scalar chomp at /usr/local/share/pskmail_server/rflinkserver.pl line 256. Use of uninitialized value $cat in split at /usr/local/share/pskmail_server/rflinkserver.pl line 257. Use of uninitialized value in concatenation (.) or string at /usr/local/share/pskmail_server/rflinkserver.pl line 5141. 12:03 UTC Mar-26-2012: Listening to the radio initialized Use of uninitialized value $cat in scalar chomp at /usr/local/share/pskmail_server/rflinkserver.pl line 4594. Use of uninitialized value $cat in split at /usr/local/share/pskmail_server/rflinkserver.pl line 4596. Use of uninitialized value in concatenation (.) or string at /usr/local/share/pskmail_server/rflinkserver.pl line 5141. 12:03 UTC Mar-26-2012: Send>APRS-IS:KZ5ED-30>PSKAPR:@261203z3599.33NP08213.11W&PSKmail 1.6.0 server
-- Eric W. Davenport Cert-In Software Systems, Inc. P.O. 346 Bakersville, NC 28705 800-873-0110 www.certin.com