[pskmail] Re: Server KB2PNM in scanning mode
- From: Robert Krasowski <rkrasowski@xxxxxxxxx>
- To: "pskmail@xxxxxxxxxxxxx" <pskmail@xxxxxxxxxxxxx>
- Date: Sat, 1 Oct 2011 05:51:11 -0700 (PDT)
HI Par, I am glad you can hear me (if it is me??) I will be waiting for any
newses about decoding.
I am working today, so can watch my server only remotely.
By the way what is the issue about using PSK500 in US??
Best Regards,
Robert
KB2PNM
________________________________
From: Pär Crusefalk <per@xxxxxxxxxxxx>
To: pskmail@xxxxxxxxxxxxx
Sent: Saturday, October 1, 2011 9:23 AM
Subject: [pskmail] Re: Server KB2PNM in scanning mode
Hi Robert,
I hear PSK250 on 14111. It should be fine to decode but I am running my
server there and my default mode is PSK500R so I am not getting any
decode as there is no TXID on. But, I will immediately change and have
minute three in PSK250. The signal is so strong that it should work both
ways.
73 de Per, sm0rwo
fre 2011-09-30 klockan 16:18 -0700 skrev Robert Krasowski:
>
>
> Hello,
> I set up my server in the scanning mode. It was quite interesting
> exercise but I got it. Later I will send an email describing problems
> that I had and how I solved tit.
> For now:
>
>
> (Frequency given in center frequency)
>
> My scanning schedule:
>
> Time: 0 min 1 min 2 min
> 3 min 4 min 5 min 6 min
> 7 min 8 min 9 min
>
> Freq: 10.148MHz 10.148MHz 10.148MHz 14.111MHz
> 14.111MHz 10.148MHz 10.148MHz 10.148MHz 14.111MHz
> 14.111MHz
>
> Beacon: Y
> Y
>
> Other way we could say that my Server listen at 10.148 MHz for 3 min
> followed by 2 min of 14.111MHz
> Beacon is in 0 min and 3 min of 10 minutes cycle.
>
> Please station from Europe, try to ping and see if You can hear me.
>
> Equipment:
> TS2000 - running 60 watts
> Antenna for 30 meters - half wave dipol
> Antenna for 20 meters - 3 el Beam looking towards Europe
>
> Thanks, please try it !!
>
> Robert
> KB2PNM
>
>
>
>
> ______________________________________________________________________
>
>
>
>
>
>
>
>
>
Other related posts:
