Hi Robert, I hear PSK250 on 14111. It should be fine to decode but I am running my server there and my default mode is PSK500R so I am not getting any decode as there is no TXID on. But, I will immediately change and have minute three in PSK250. The signal is so strong that it should work both ways. 73 de Per, sm0rwo fre 2011-09-30 klockan 16:18 -0700 skrev Robert Krasowski: > > > Hello, > I set up my server in the scanning mode. It was quite interesting > exercise but I got it. Later I will send an email describing problems > that I had and how I solved tit. > For now: > > > (Frequency given in center frequency) > > My scanning schedule: > > Time: 0 min 1 min 2 min > 3 min 4 min 5 min 6 min > 7 min 8 min 9 min > > Freq: 10.148MHz 10.148MHz 10.148MHz 14.111MHz > 14.111MHz 10.148MHz 10.148MHz 10.148MHz 14.111MHz > 14.111MHz > > Beacon: Y > Y > > Other way we could say that my Server listen at 10.148 MHz for 3 min > followed by 2 min of 14.111MHz > Beacon is in 0 min and 3 min of 10 minutes cycle. > > Please station from Europe, try to ping and see if You can hear me. > > Equipment: > TS2000 - running 60 watts > Antenna for 30 meters - half wave dipol > Antenna for 20 meters - 3 el Beam looking towards Europe > > Thanks, please try it !! > > Robert > KB2PNM > > > > > ______________________________________________________________________ > > > > > > > > >