[pskmail] Re: Config parameters save and not
- From: G6CKR <radio@xxxxxxxxxxxxxxx>
- To: pskmail@xxxxxxxxxxxxx
- Date: Fri, 22 Apr 2011 21:19:37 +0100
On 22/04/11 16:44, Pär Crusefalk wrote:
> fre 2011-04-22 klockan 16:42 +0100 skrev G6CKR:
>> On 22/04/11 16:37, Pär Crusefalk wrote:
>>> fre 2011-04-22 klockan 15:43 +0100 skrev G6CKR:
>>>> I look forward to testing when it appears in the Alpha directory.
>>>> Can you check the offset seconds are working again?
>>>> 73 Roger G6CKR.
>>>>
>>>
>>> Hi Roger,
>>>
>>> The in laws just arrived so I will have to leave the PC for now...
>>> But, if you want to try it out then I quickly compiled a new installer
>>> and uploaded it here: http://www.crusefalk.se/jpskmailinstall/
>>> Its the one called Alpha and it really is alpha as I didn't even run
>>> it... Fingers crossed hoping it works. And now time for drinks in the
>>> sun :-)
>>>
>>> 73 de Per sm0rwo
>>
>> Was meaning as and when not trying to rush you more to indicate the
>> interest and that you were not wasting your time, but when next in the
>> shack I will give it a try on the RX only second machine.
>> 73 Roger
>>
>>
>
> No problem Roger, thanks in advance for testing.
>
> 73!
>
>
RX machine is running and gating.
It did not read in old Lat / Lon but did allow me to enter and save.
Beacons are going to the speakers with offset seconds set to 50 and I
think it is being used although I'm not hearing the audio too well over
the TV seems to be noisy program every time the beacon goes.
There is some Snooker on later that should be a bit quieter most of the
time.
All gated traffic today is from the test version.
Will either move the SignaLink over or risk an install on the other
machine tomorrow when I will test other functions.
73 Roger
Other related posts:
