Did all this, shut down then uninstalled 360 all together which oddly enough in the 60 day trial the printer worked fine (go figure). The printer could not be added at all but, it was now a network device instead. I wonder how windows 8 will be? Peter Kaulback On 11/7/2010 3:32 PM, Ben Moore wrote: > I'm not familiar with Norton 360. I have a wireless Canon printer/scanner. > I have to allow two programs, a print utility and a scan utility, to access > the local network in Zone Alarm. There was also a network setup utility I > had to use to get the thing running. You could check your program > permissions. Then I would delete the printer and software and go through > the wireless installation again. > > Ben Moore > > -----Original Message----- > From: pcworks-bounce@xxxxxxxxxxxxx [mailto:pcworks-bounce@xxxxxxxxxxxxx] On > Behalf Of Peter Kaulback > Sent: Sunday, November 07, 2010 11:45 AM > To: pcworks > Subject: [PCWorks] Norton 360 blocks wireless laptop from printing > > I have an in-law with a wireless network with a win7 laptop trying to > print to a network attached canon mx850 printer. Norton 360 was > installed and it says the printer is part of the trusted network but the > laptop can't see it unless it is connected directly. The printer was > seen before 360 was installed. > > Any ideas? > > Thank you, > > Peter Kaulback ========================= The list's FAQ's can be seen by sending an email to PCWorks-request@xxxxxxxxxxxxx with FAQ in the subject line. To unsubscribe, subscribe, set Digest or Vacation to on or off, go to //www.freelists.org/list/pcworks . You can also send an email to PCWorks-request@xxxxxxxxxxxxx with Unsubscribe in the subject line. Your member list settings can be found at //www.freelists.org/cgi-bin/lsg2.cgi/l=pcworks . Once logged in, you have access to numerous other email options. The list archives are located at //www.freelists.org/archives/pcworks/ . All email posted to the list will be placed there in the event anyone needs to look for previous posts. -zxdjhu-