Randy, Are you still taking the nose out with the double prisms, or in software? Marshall On Mon, Aug 25, 2014 at 2:13 PM, Verdick, Randall E < randall-verdick@xxxxxxxxx> wrote: > > > Here at Iowa, we use an infrared and visible light black and white video > camera at 1280x1024 res. Software allows us to record video and/or still > images from a computer screen. We use an IR light to see the image in > darkness. After the images are grabbed, we upload to OIS via one of Paul > Montague’s old image upload programs. We used to do this with Polaroid > film! I included a couple examples. > > > > > > Randall Verdick, FOPS > > Educational Media Coordinator > > Department of Ophthalmology & Visual Sciences > > 319-356-2918 > > > > > > > > *From:* optimal-bounce@xxxxxxxxxxxxx [mailto:optimal-bounce@xxxxxxxxxxxxx] > *On Behalf Of *Paula Morris > *Sent:* Monday, August 25, 2014 12:31 PM > *To:* optimal@xxxxxxxxxxxxx > *Subject:* [optimal] Re: Pupil Photos Set-up? > > > > HI from Moran, Adeline, > > > > When the Moran imagers shoot the pupil series, we use a Nikon D100 with a > 28-70 mm zoom. Download into our image data base with a card reader, but > crop to just eyes first. > > > > When the PA in neuro shoots the pupil series, she uses the Canon PowerShot > SX10 IS with a 5 -100 zoom. Download with a cable. Framing in so you have > bilateral canthus to canthus and still can see lid position is what we aim > for. We use a tripod so you needn’t worry about the camera drifting with > the lights off. I personally have the pt hold their head still against the > chair or the wall using Mr. Bill Nyberg’s fabulous tool, a light weight box > that the pt holds between the hard surface and their head. It is a great > tool – the pt can hear their head move against the box, and they hold > really still – if they are capable of that. Pts can even tell you when > they have moved so you can re-align. > > > > Good luck – the investment in the camera will be worth it. > > > > Glad the Moran protocol translates well – Dr. Digre sat at the foot of the > master, Dr. Stan Thompson at Iowa, and we have been using that protocol > with excellent success for 25 years. > > > > As ever, > > p > > > > *From:* optimal-bounce@xxxxxxxxxxxxx [mailto:optimal-bounce@xxxxxxxxxxxxx > <optimal-bounce@xxxxxxxxxxxxx>] *On Behalf Of *Marshall Tyler > *Sent:* Monday, August 25, 2014 11:13 AM > *To:* optimal@xxxxxxxxxxxxx > *Subject:* [optimal] Re: Pupil Photos Set-up? > > > > Adeline, > > Position patient with head against wall and where you can get to the light > switch while holding the camera in shooting position. Consider a foot > switch! > > Frame up, shoot room light photos - far & near, > > Frame up, lights off 5 seconds, don't move, voice command to patient: > "Open eyes wide by # ONE, 3,2,1", shoot, verify focus and framing, > > repeat using 30 seconds. > > Re-shoot as necessary. > > May the force be with you, > > *Marshall* > > Marshall E Tyler, FOPS > > www.TwinChimney.com > > Books for the Ophthalmic Photographer > > > > On Mon, Aug 25, 2014 at 12:55 PM, Adeline Stone <astone@xxxxxxxxxxxxxx> > wrote: > > Hello- > > > > We have a new neuro-ophthalmologist and I am wondering the set-up for > external pupil photos? We are following the (adies) moran eye center > protocol room light at far, near, with reaction, room lights off 5 secs, > pilo for 30 then room lights off 5secs. I am taking these with an IPad > which is what we do our upper lid photos with. You can imagine these were > not very good or easy to get…. > > > > Any suggestions on equipment would be great so we can get better quality? > > > Thanks, > > Adeline Stone, COT CRA > > Diagnostic Services Supervisor > > > > > > > ------------------------------ > Notice: This UI Health Care e-mail (including attachments) is covered by > the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is > confidential and may be legally privileged. If you are not the intended > recipient, you are hereby notified that any retention, dissemination, > distribution, or copying of this communication is strictly prohibited. > Please reply to the sender that you have received the message in error, > then delete it. Thank you. > ------------------------------ >