[muglo] Re: Partitioning 80 GB drive for Tiger

  • From: Leith Peterson <leithriver@xxxxxx>
  • To: muglo@xxxxxxxxxxxxx
  • Date: Sat, 10 Jan 2009 21:04:51 -0500

>On Jan 10, 2009, at 5:07 PM, Leith Peterson wrote:
>>
>>  1.  Does each partition have to have a copy of Tiger on it in order
>>  to function?
>
>No.

When I first bought this used G4, it had a partitioned drive for OS 9 
and 10.  However, it is a very small drive and so I bought the second 
80 GB drive and use it exclusively.  One of the other reasons I don't 
use the smaller drive is that, since I erased everything on both its 
partitions, I can't copy anything to it.  Your explanation about the 
"master" and "slave" drives probably accounts for why I haven't been 
able to.
>
>>  As I also understand
>>  it, I should not store anything else on the bootable clone because it
>>  may cause the backup software not to work properly.  Do you agree
>>  with these points?
>>
>
>Not sure.  I know CCC can do incremental back ups and SuperDuper 
>likely does as well.  Not sure how it would interfere.  Likely all 
>you would want to back up are your critical files and occasionally re-
>clone the system.


I've heard that Time Machine can act strangely if anything is stored 
on the drive other than the automated backup.  But Time Machine is a 
Leopard product and I'm just moving over to Tiger now.  Perhaps this 
reported problem only relates to Time Machine and not other backup 
software.

>
>I have a similar machine. Your G4 comes with cabling already in place 
>for a second drive.  Rather than partition your current drive I would 
>add a second drive, cost shouldn't be that much <$100 depending on 
>size.  You should be able to use a drive up to about 120 GB without 
>partitioning.  Should you get a larger drive (e.g. 250 GB) I think 
>there is a limit of 128 GB for the first addressable partition for a 
>larger drive if you plan to use them as the boot drive.  You may have 
>to adjust the jumper pin on the back of the second drive to slave 
>rather than master.  If the main drive does go and you have cloned 
>your master drive to it you should be able to choose it on start up -
>can't think of the command off hand, and be up and running with your
>last saved (cloned) system.  I would suggest a documents folder that
>you create for all your work which you could then save daily to the 
>second (slave drive) as a back-up.
>
>Martin


That's a really good suggestion, Martin.  I should just replace the 
smaller drive with a larger one for cloning/backup purposes.

Thanks,

Leith

---
MUGLO information at <http://www.freewebs.com/muglo>
Manage your account options at <//www.freelists.org/cgi-bin/lsg2.cgi>



Other related posts: