I'd be glad to lay it out in CAD and send a DXF to TEL and then you Lee once final required sizes are known. Cheers, Jeff Dayman Waterloo Ontario Canada ----- Original Message ----- From: "Lee Grant" <leegrant@xxxxxxxxxx> To: <modeleng@xxxxxxxxxxxxx> Sent: Thursday, September 02, 2004 6:14 AM Subject: [modeleng] Re: sprockets > Tel > I had a talk with a couple of people at work today and I may be able to do > this for nix. The job is half done if you can supply a good cad drawing in > DXF format > (DWG will do) My cad skill's are almost nil. Maybe someone on the List > with good cad skills can help out. With a good drawing it's easy to convert > to machine code using Procad software then I can grab an off-cut clamp in > the laser and press go. ( well almost that easy) > > Lee Grant > Queanbeyan > > ----- Original Message ----- > From: "Terry Lane" <tel@xxxxxxxxxxx> > To: <modeleng@xxxxxxxxxxxxx> > Sent: Wednesday, September 01, 2004 11:10 PM > Subject: [modeleng] Re: sprockets > > > > Thanks Lee - I might have to take you up on that yet. Do you think you > could > > get me a rough price for an aluminium sprocket, 3mm thick, aprox 500 mm > dia, > > with aprox 420 teeth (1/4 pitch. I'll see what I can do about a drawing - > > tho' I'm by no means a CAD expert.) > > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email to, > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line. MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.