[modeleng] Re: sprockets
- From: "Jeff Dayman" <jeffdayman@xxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Fri, 3 Sep 2004 08:36:10 -0400
No Problem TEL, don't forget to include a description of whatever hub and
screw holes details you need. Once the stock is on the laser table, a few
extra holes are nothing to do.
Want your initials in the plate as well? 8>)
Cheers, Jeff Dayman Waterloo Ontario Canada
----- Original Message -----
From: "Terry Lane" <tel@xxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Thursday, September 02, 2004 6:24 PM
Subject: [modeleng] Re: sprockets
> This is beatiful guys - I'll work it out for you this afternoon Jeff.
>
> Thanks
>
>
> > I'd be glad to lay it out in CAD and send a DXF to TEL and then you Lee
> once
> > final required sizes are known.
> >
> > Cheers, Jeff Dayman Waterloo Ontario Canada
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "Lee Grant" <leegrant@xxxxxxxxxx>
> > To: <modeleng@xxxxxxxxxxxxx>
> > Sent: Thursday, September 02, 2004 6:14 AM
> > Subject: [modeleng] Re: sprockets
> >
> >
> > > Tel
> > > I had a talk with a couple of people at work today and I may be able
to
> do
> > > this for nix. The job is half done if you can supply a good cad
drawing
> in
> > > DXF format
> > > (DWG will do) My cad skill's are almost nil. Maybe someone on the
List
> > > with good cad skills can help out. With a good drawing it's easy to
> > convert
> > > to machine code using Procad software then I can grab an off-cut clamp
> in
> > > the laser and press go. ( well almost that easy)
> > >
> > > Lee Grant
> > > Queanbeyan
> > >
> > > ----- Original Message -----
> > > From: "Terry Lane" <tel@xxxxxxxxxxx>
> > > To: <modeleng@xxxxxxxxxxxxx>
> > > Sent: Wednesday, September 01, 2004 11:10 PM
> > > Subject: [modeleng] Re: sprockets
> > >
> > >
> > > > Thanks Lee - I might have to take you up on that yet. Do you think
you
> > > could
> > > > get me a rough price for an aluminium sprocket, 3mm thick, aprox 500
> mm
> > > dia,
> > > > with aprox 420 teeth (1/4 pitch. I'll see what I can do about a
> > drawing -
> > > > tho' I'm by no means a CAD expert.)
> > >
> > > MODEL ENGINEERING DISCUSSION LIST.
> > >
> > > To UNSUBSCRIBE from this list, send a blank email to,
> > > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the
> subject
> > line.
> >
> > MODEL ENGINEERING DISCUSSION LIST.
> >
> > To UNSUBSCRIBE from this list, send a blank email to,
> > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the
subject
> line.
> >
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.
>
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
