[modeleng] Re: Painting Brass ~ Easy Peasy
- From: "Ron Head" <ron.head@xxxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Fri, 24 Dec 2004 20:31:25 -0000
H Clif
I've heard good reports of this paint, but I've never seen it in the shops
anywhere. Can you suggest a stockist?
Regards
Ron Head
----- Original Message -----
From: "Clif Walker" <clif.gwr@xxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Thursday, December 23, 2004 5:09 PM
Subject: [modeleng] Re: Painting Brass ~ Easy Peasy
> Hi All,
>
> I've used Galvanising/Non Ferous Primer made by Blackfriers Paints onto
> brass for the last two locos that I built
> So far one loco has lasted for three years with no sign of the paint
> coming
> off.
> The beauty of the stuff is that it can be thinned with White Spirit and
> sprayed with an Airbrush.
>
> Regards
>
> Clif
> ----- Original Message -----
> From: "Pendragon" <idpriest@xxxxxxxxxxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Thursday, December 23, 2004 3:44 PM
> Subject: [modeleng] Painting Brass ~ Easy Peasy
>
>
>>
>>
>> Gents.
>>
>> Re painting brass have you tried 'Special Metals Primer' by Hammerite,
>> this stuff is bullet proof, my mate and I did a test on some brass and
>> the following day the primer could not be scratched off, it is really
>> superb and not that expensiveI have a 500ml tim from memory the cost was
>> =A33:50.......usual disclaimers.
>>
>>
>> Regards,
>>
>> IP
>>
>> --=20
>> No virus found in this outgoing message.
>> Checked by AVG Anti-Virus.
>> Version: 7.0.296 / Virus Database: 265.6.4 - Release Date: 22/12/2004
>> =20
>>
>> MODEL ENGINEERING DISCUSSION LIST.
>>
>> To UNSUBSCRIBE from this list, send a blank email to,
>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
