[modeleng] Re: Painting Brass ~ Easy Peasy
- From: "Clif Walker" <clif.gwr@xxxxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Sat, 25 Dec 2004 10:55:37 -0000
Hi Ron and All,
As I live in Cornwall that is a bit difficult.
I suggest that you contact Blackfriars Paints themselves in Bristol to find
a stockist in your area.They were very helpful when I queried the use of the
paint on brass.
Regards
Clif
----- Original Message -----
From: "Ron Head" <ron.head@xxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Friday, December 24, 2004 8:31 PM
Subject: [modeleng] Re: Painting Brass ~ Easy Peasy
> H Clif
>
> I've heard good reports of this paint, but I've never seen it in the shops
> anywhere. Can you suggest a stockist?
>
> Regards
> Ron Head
>
> ----- Original Message -----
> From: "Clif Walker" <clif.gwr@xxxxxxxxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Thursday, December 23, 2004 5:09 PM
> Subject: [modeleng] Re: Painting Brass ~ Easy Peasy
>
>
> > Hi All,
> >
> > I've used Galvanising/Non Ferous Primer made by Blackfriers Paints onto
> > brass for the last two locos that I built
> > So far one loco has lasted for three years with no sign of the paint
> > coming
> > off.
> > The beauty of the stuff is that it can be thinned with White Spirit and
> > sprayed with an Airbrush.
> >
> > Regards
> >
> > Clif
> > ----- Original Message -----
> > From: "Pendragon" <idpriest@xxxxxxxxxxxxxxxx>
> > To: <modeleng@xxxxxxxxxxxxx>
> > Sent: Thursday, December 23, 2004 3:44 PM
> > Subject: [modeleng] Painting Brass ~ Easy Peasy
> >
> >
> >>
> >>
> >> Gents.
> >>
> >> Re painting brass have you tried 'Special Metals Primer' by Hammerite,
> >> this stuff is bullet proof, my mate and I did a test on some brass and
> >> the following day the primer could not be scratched off, it is really
> >> superb and not that expensiveI have a 500ml tim from memory the cost
was
> >> =A33:50.......usual disclaimers.
> >>
> >>
> >> Regards,
> >>
> >> IP
> >>
> >> --=20
> >> No virus found in this outgoing message.
> >> Checked by AVG Anti-Virus.
> >> Version: 7.0.296 / Virus Database: 265.6.4 - Release Date: 22/12/2004
> >> =20
> >>
> >> MODEL ENGINEERING DISCUSSION LIST.
> >>
> >> To UNSUBSCRIBE from this list, send a blank email to,
> >> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the
subject
> > line.
> >
> > MODEL ENGINEERING DISCUSSION LIST.
> >
> > To UNSUBSCRIBE from this list, send a blank email to,
> > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the
subject
> > line.
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.298 / Virus Database: 265.6.4 - Release Date: 22/12/2004
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.298 / Virus Database: 265.6.4 - Release Date: 22/12/2004
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
