As, ideed, would I. Did have a sketch of one somewhere once & I think I understand the principal but ... > Peter, > > I wouldn't mind a good sketch of the machine, so I can make one for myself. > > Cheers, > > Phill. > > ----- Original Message ----- > From: "Peter J. Cathcart" <peter.cathcart@xxxxxxxxxxxxx> > To: <modeleng@xxxxxxxxxxxxx> > Sent: Saturday, December 25, 2004 12:29 AM > Subject: [modeleng] Model Engineering Exhibition > > > > Is anyone going to Sandown Park 29/31st December? I will be on the IDSME > > stand on the 29th. We are the far side of the stairs, tucked in nicely but > > not the easiest to find as Wilfried knows from his visit. > > > > Have you ever made a rope? One of our members needed rope for his steam > tug > > boat, couldn't find what he needed so made a rope maker. I decided this > > would be useful for scouts so I made my own, about 6 feet long. Simple > > really, just a few cogs and wheels, bits of wire etc. Fascinating to > watch > > though. It will be on the stand and anyone wanting a go is welcome. At > > least you will be able to take something useful away that you made > yourself > > and which cost you nothing! Just up Tel's street. > > > > Peter > > > > > > > > MODEL ENGINEERING DISCUSSION LIST. > > > > To UNSUBSCRIBE from this list, send a blank email to, > > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject > line. > > > > > > > > > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email to, > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line. > MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.