[modeleng] Re: 'Mode Engineer' articles
- From: "Ken Strauss" <ken.strauss@xxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Mon, 1 Dec 2008 14:14:00 -0500
Agreed. The UK is not nearly as big as many in North America think plus
there is excellent public transportation available. Thurso to London is only
about 650 miles and most shows would be somewhat closer.
> -----Original Message-----
> From: modeleng-bounce@xxxxxxxxxxxxx [mailto:modeleng-bounce@xxxxxxxxxxxxx]
> On Behalf Of deanrise@xxxxxxxxxxxxx
> Sent: Monday, December 01, 2008 1:22 PM
> To: modeleng@xxxxxxxxxxxxx
> Subject: [modeleng] Re: 'Mode Engineer' articles
>
> I think you'll find Dave Clark is Already editor of MEW. He's done a
> particularly good job of turning that around in the last 18 months. He
> always makes an effort to get to the big exhibitions - good luck to
> him.
>
> Andy
>
> >----Original Message----
> >From: clif.gwr@xxxxxxxxxxxx
> >Date: 01/12/2008 17:16
> >To: <modeleng@xxxxxxxxxxxxx>
> >Subj: [modeleng] Re: 'Mode Engineer' articles
> >
> >Hi All,
> >
> >I see that he is located in Thurso. A strange place for an editor of
> ME to
> >be as you cannot get much further North than that on the mainland.
> > I suppose it is all about using electronic communication but he is
> going to
> >have one heck of a job attending exhibitions etc.
> >
> >Regards
> >
> >Clif
> >----- Original Message -----
> >From: "Shep" <shep.28@xxxxxxxxxxxx>
> >To: "Modeleng" <modeleng@xxxxxxxxxxxxx>
> >Sent: Monday, December 01, 2008 11:48 AM
> >Subject: [modeleng] 'Mode Engineer' articles
> >
> >
> >> Hello everyone
> >> This advert appeared on that excellent site www.homeworkshop.org.uk
> >>
> >> Have any of us sent articles to this magazine and are still
> awaiting a
> >> reply? This new editor sounds like good news!
> >>
> >> Cheers! Hubert
> >>
> >>
> >> Posted on 30th November
> >>
> >> Information
> >> Books/Magazines
> >> Hi There I have taken over as editor of Model Engineer. If anyone
> has
> >> submitted an article in the last 3 years and has not seen it
> published or
> >> had a reply, please contact me about submitting it again.
> >>
> >> David Clark
> >> david.clark[ at ]myhobbystore.com
> >> 01847 821136
> >> Thurso
> >> Scotland
> >>
> >> MODEL ENGINEERING DISCUSSION LIST.
> >>
> >> To UNSUBSCRIBE from this list, send a blank email to,
> >> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the
> subject
> >> line.
> >
> >
> >-------------------------------------------------------------------------
> -------
> >
> >
> >
> >No virus found in this incoming message.
> >Checked by AVG - http://www.avg.com
> >Version: 8.0.176 / Virus Database: 270.9.11/1820 - Release Date:
> 29/11/2008
> >18:52
> >
> >MODEL ENGINEERING DISCUSSION LIST.
> >
> >To UNSUBSCRIBE from this list, send a blank email to,
> >modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the
> subject line.
> >
>
>
>
>
>
> Savings and Debt Help from the experts - http://www.tiscali.co.uk/money/
> __________________________________________________________
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
