01526 320012 or www.stationroadsteam.co.uk Peter ----- Original Message ----- From: "Pendragon" <idpriest@xxxxxxxxxxxxxxxx> To: <modeleng@xxxxxxxxxxxxx> Sent: 29 November 2005 21:54 Subject: [modeleng] Re: LNER A3 Mike, Thanks for the info but by any chance have you got a contact number? Regards IP "Life should NOT be a journey to the grave with the intention of = arriving safely in an attractive and well preserved body, but rather to skid in sideways, Champagne in one hand - strawberries in the other,=20 body thoroughly used up, totally worn out and screaming WOO HOO - What a Ride!"=20 =20 "Never drive faster than your gaurdian angel can fly" =20 Priest & Sons Model Engineers http://www.kinvermes.pwp.blueyonder.co.uk/p1.htm -----Original Message----- From: modeleng-bounce@xxxxxxxxxxxxx = [mailto:modeleng-bounce@xxxxxxxxxxxxx] On Behalf Of Peter Beevers Sent: 29 November 2005 08:04 To: modeleng@xxxxxxxxxxxxx Subject: [modeleng] Re: LNER A3 Ian, Mike Palmer at Station road steam has a 3.5" gauge A2 (but us = Gresley=20 men wouldn't touch one of those with a bargepole), but he also had a = picture on his website a week or so ago of a nice 5" A3 which has never appeared = for sale - might be worth giving him a ring . . . . . He also has a set of=20 Clarkson's castings to build one . . . . Hope this may be of use, Peter ----- Original Message -----=20 From: "Pendragon" <idpriest@xxxxxxxxxxxxxxxx> To: <modeleng@xxxxxxxxxxxxx> Sent: 28 November 2005 22:48 Subject: [modeleng] LNER A3 Gents, Anyone know of an A3 in either 5 inch or 3.5 inch which might be for = sale. Regards IP "Life should NOT be a journey to the grave with the intention of = arriving safely in an attractive and well preserved body, but rather to skid in sideways, Champagne in one hand - strawberries in the other, body = thoroughly used up, totally worn out and screaming WOO HOO - What a Ride!" "Never drive faster than your gaurdian angel can fly" Priest & Sons Model Engineers http://www.kinvermes.pwp.blueyonder.co.uk/p1.htm MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the = subject=20 line. MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to,=20 modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the = subject line. MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line. MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.