[modeleng] Re: Digital Angle Guage

Thanks Wilfried

I am delighted to have your commendation of the digital angle gauge.   I 
forsee a lot of uses on the milling machine and the lathes.

I wish you a Happy Christmas and a busy modelling New Year.

Cheers!   Hubert

----- Original Message ----- 
From: "Wilfried Vermeiren" <vermeiren.wilfried@xxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Thursday, December 18, 2008 8:09 PM
Subject: [modeleng] Re: Digital Angle Guage


> -----Oorspronkelijk bericht-----
> Van: modeleng-bounce@xxxxxxxxxxxxx [mailto:modeleng-bounce@xxxxxxxxxxxxx]
> Namens Shep
> Verzonden: woensdag 17 december 2008 17:39
> Aan: Modeleng
> Onderwerp: [modeleng] Digital Angle Guage
>
> Hi,
> Long time since I posted something but I can tell from experience that
> Allendale Electronics has some really wonderful stuff for us modellers.
> I met them last year at Alexandra and they had some convincing promotions.
> So I went home with the digital dept gauge see
> http://www.machine-dro.co.uk/index.php?target=products&product_id=160
> Now you, well I do, rarely need a dept gauge but . This one has a hook at
> the business end. Ever tried to measure up the thickness of a ring held in
> the 3-jaw ? Simply hook the business end of the gauge behind the ring and
> bring up the foot against the face. Scroll down the page to the drawing 
> with
> L2 on it and it will be instant clear what I mean. Can tell you that this
> one lives next to the normal calliper and sees a lot of use.
> The next tempting item was the digital angle gauge. See
> http://www.machine-dro.co.uk/index.php?target=products&product_id=7
> Primarily intended for use on woodworking machines it to finds its use in
> the ME shop. setting the angle plate on the mill is one of the uses which
> springs to mind. used it also in combination with the bending machine.
> I have no connection with the firm whatsoever, just a satisfied costumer.
> But a stop at  their stand at Alexandra is time well spend. Just one 
> warning
> keep an eye on your credit card or it will end up a lot thinner.
> Regards and seasons greetings to you all.
> Wilfried Vermeiren
> 51 11'44.19"N, 4 30'53.66"E
> http://users.skynet.be/modelbouw.wilfried
> updated.
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line. 

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: