[modeleng] Anti vibration mounts
- From: "Douglas Johnston" <d-johnston@xxxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Wed, 2 Nov 2005 15:03:30 -0800
I am thinking about moving my workshop inside the house in the loft space
and was wondering about the wisdom of using anti-vibration mounts to reduce
the noise transmitted to the rooms below. The two main machines I have are a
Myford Speed 10 lathe (less than 100 kg) and a Myford VMB mill (about
140kg). Has anybody any experience of using such mounts ,and if so ,do they
make much of a difference? Any information about suppliers would also be
helpful.
Doug Johnston
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.12.7/155 - Release Date: 01/11/05
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
