Re: [MoAccess] installing motiff es usb driver
- From: <fioresq1@xxxxxxxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Sat, 22 Sep 2007 14:27:24 -0400
Please disregard, I figured out the problem with sonar.
----- Original Message -----
From: <fioresq1@xxxxxxxxxxx>
To: <MoAccess@xxxxxxxxxxxxx>
Sent: Saturday, September 22, 2007 9:44 AM
Subject: [MoAccess] installing motiff es usb driver
> Hello: I have installed the usb driver for the motif es; however in Sonar,
> I'm hearing no sound. The installation was weird as the prompt was that
> this may be incompatible with windos xp, but the manual said to do it that
> way. Does it sould like I may have not completed the installation
properly?
> Thanks ----- Original Message -----
> From: Bryan Smart <bryansmart@xxxxxxxxxxxxxx>
> To: <MoAccess@xxxxxxxxxxxxx>
> Sent: Friday, September 21, 2007 10:53 PM
> Subject: Re: [MoAccess] Vocoder feature not working.
>
>
> The fourth setting down on the F2 screen (from top left) *should* kill
> the mic when you change it. It is sending the mic somewhere else. The
> setting for the insert block is the last item in that list: spin the
> data dial all the way to the right.
>
> Unfortunately, I won't be around an XS for another week, so can't work
> this out right now.
>
> Bryan
>
> -----Original Message-----
> From: moaccess-bounce@xxxxxxxxxxxxx
> [mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Reeves
> Sent: Friday, September 21, 2007 3:21 PM
> To: MoAccess@xxxxxxxxxxxxx
> Subject: Re: [MoAccess] Vocoder feature not working.
>
> The forth setting down on the f2 screen kills my mic and the main
> outputs somehow. It still doesn't work. When I exit out of utility mode,
> it seems like the whole board is muted. I have to go back in and set it
> back. The f4 screen scrolls through some different effects. Not sure
> where I'm going wrong.
>
>
>
>
Other related posts:
- » Re: [MoAccess] installing motiff es usb driver
