[linux-cirrus] U-Boot for EP93xx: status of ethernet driver
- From: llandre <r&d2@xxxxxxxxxxxx>
- To: ctusar@xxxxxxxxxxxxxxxxxx
- Date: Wed, 19 Jul 2006 10:32:06 +0200
Hi Cory,
I encountered a problem on custom hardware (EP9301-based) during a TFTP
download. The transfer gets stuck and the driver prints continuously
this message:
eth.c: 711: eth_rx(): packet rx error, status B0020100 800003AC
I still working with the driver included in the patch you released last
november. So I had a look to the ml to see if there are news about
u-boot and I found this new patch:
//www.freelists.org/archives/linux-cirrus/04-2006/msg00008.html
Also I read these messages about proposed fixes to the ethernet driver
by Hiroshi Ito:
//www.freelists.org/archives/linux-cirrus/05-2006/msg00016.html
//www.freelists.org/archives/linux-cirrus/05-2006/msg00023.html
I'd like to update the ethernet driver with the one you released last April.
Do you think the error I got is due to the old (bogus) driver?
Did you test and validate the patches proposed by Hiroshi Ito? If yes,
is it possible to have a patch including these new corrections?
Thanks in advance,
llandre
DAVE Electronics System House - R&D Department
web: http://www.dave-tech.it
email: r&d2@xxxxxxxxxxxx
Other related posts:
