[korgypark] Re: MIDI signal inducing noise using 05R/W serial connection
- From: randy.suchy@xxxxxxxxxxx
- To: korgypark@xxxxxxxxxxxxx
- Date: Tue, 25 Feb 2003 13:58:14 EST
Will check Wednesday nite, but sounds like a very good shot bud, thanks! I
just added a serial cable extension which now runs together with the audio
line away from the Korg. I had problem before this though, maybe not as
severe, so maybe positioning of cable might help me out, I'll let you know
here. I just hope it's that, or a ground solution and not serial data
entering the host port contaminating audio within the Korg itself!
> How close does your PC I/F cable run to your audio cable? Does it run along
> side it for any distance? I have seen similar problems with my mouse -
> every time I moved the mouse I could hear buzzing in the monitors -
> eventually I found it was because my mouse cable was bunched up next to the
> line output of the sound card. Since both mice and the PC I/F cables carry
> serial data, the problems sound remarkably similar.
>
> In other words, check your cabling before you go looking for ground loops
> ;-).
>
> hope that helps,
>
> Andy
>
----------------------------------------------------------------
This message was sent through the Korgy Park mailing list.
Mailing list info page: //www.freelists.org/list/korgypark.
Other related posts:
