Also, make sure the jsonar layout is loaded. At 06:23 AM 1/23/2012, you wrote:
Try switching to the Windows Classic Theme. By default, Windows 7 uses the Windows 7 Basic theme and this does not work with the HSC sets. --Pete -----Original Message----- From: jsonar-bounce@xxxxxxxxxxxxx [mailto:jsonar-bounce@xxxxxxxxxxxxx] On Behalf Of Rylan Vroom Sent: Monday, January 23, 2012 3:36 AM To: jsonar@xxxxxxxxxxxxx Subject: [jsonar] problem finding track tabs while in bus view. Hello listers, I'm a relative newbie to Sonar and have noticed that JSonar tells me that it can't find track tabs, and to "press f1" for help. After reading through the documentation and searching for the problem, I figured out that a relaunch usually did the trick but from track view, not bus view where my Sonar seems to start out when freshly open. Because of this, Hotspots are failing throughout the program, especially when trying to access plugins. I'm running Sonar 8.5.3 with jaws 12, HSC clicker installed and all sets imported. The startup dialog has been disabled as per the system registry method. I have checked and rechecked the tool bar settings and that x-ray has been disabled. My system is a 32 bit windows 7 operating system, intel I3 at 2.9ghz, 4gb of ram, more than enough HDD space to do the job, newer model nvidia graphics card, and tascam us122 sound card. Any thoughts? Did I miss anything? :) Any help would be appreciated. cheers Rylan
For all your audio production needs and technology training, visit us at www.affordablestudioservices.com or contact Chris Belle cb1963@xxxxxxxxxxxxx or Stephie Belle stephieb1961@xxxxxxxxxxxxx for customized web design