Cindy, Here's a message that GWCox sent me. I did it to find out how to do it with jaws 7 and maybe if you go through all these steps you can find the assignment key and if anything is assigned in your version of jaws. Good Luck, Judith
Here's one that didn't make the announcement, but that has a lot of potential value. In JAWS 7, there are new scripts in both the Outlook and Outlook Express script files that, when enabled, allow you to reply directly to the individual who sent a message to a list without replying to the whole list. The scripts are named ReplyDirectlyToSender and here's how to enable them: 1. Open your e-mail program, Outlook or Outlook Express. This function is not available to Eudora users. 2. Press INSERT+8 to open the Keyboard Manager. 3. If necessary, press TAB once to move focus into the list if individual scripts within the script source file. 4. In the list of scripts, locate the ReplyDirectlyToSender script. 5. Press CTRL+A to assign a keystroke to this script. I used CTRL+SHIFT+A since it wasn't assigned to anything else, but you can use any other unassigned keystroke. 6. Press TAB once and uncheck the check box that asks if you want to assign the keystroke only to whatever keyboard configuration (desktop or laptop) you're using. 7. TAB to the OK button and press ENTER. 8. Press ENTER again to save and exit. -- Walt Smith - Clearwater, FL walt@xxxxxxxxxx----- Original Message ----- From: "Cindy Handel" <cindy425@xxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx> Sent: Saturday, December 01, 2007 9:59 PM Subject: Re: Replying directly to sender in JAWS 9
I wonder why some of us can't do it, though. I can reply to someone who is in my address book, but not someone who is not. Cindy----- Original Message ----- From: "Rick Harmon" <rharmon@xxxxxxxxxxxxxxxxxxx>To: <jfw@xxxxxxxxxxxxx> Sent: Saturday, December 01, 2007 9:43 PM Subject: Re: Replying directly to sender in JAWS 9I'm able to reply to sender here with OE and Jaws 9 without the problems you are having. Your're not in my address book and I can reply to you directlyno differently than in previous versions of Jaws. Rick -- Visit my webpage and podcast feed at: http://www.blind-geek-zone.net and my web Blog at: http://blind-geek-zone.blogspot.com/ Join the BGZ mailing list by sending a blank email message to: blind_geek_zone-request@xxxxxxxxxxxxx and put subscribe in the subject line. Contact info: Email - rickharmon@xxxxxxxxxxxxx & rharmon@xxxxxxxxxxxxxxxxxxx Skype - rharmon928 MSN - rharmon928@xxxxxxxxxxx----- Original Message ----- From: "Bob Verity" <rtverity@xxxxxxxxxxxxx>To: <jfw@xxxxxxxxxxxxx> Sent: Saturday, December 01, 2007 9:03 PM Subject: Re: Replying directly to sender in JAWS 9 FSI's problem, as I see it, is that they do not do an adaquit job ofregression testing of their products before they are moved into production.I also believe that a major cause of their problems is a lack of strictcoding standards where there are no exceptions and the absolute enforcement of these standards. Programmers like to be indivualists and do things their way and not be confined with rules, especially rules that they can't break.The genius that wrote a given module of code may not be around when that module needs to be revised and now the poor slob, who has to maintain thecode, obviously lacking the genius level intelegence of the original author,has to decipher the convoluted rat's nest of code in order to make some minor revision. Sorry about the soap box just something I am adamant about.----- Original Message ----- From: "Don Moore" <donmoore@xxxxxxxxxxx>To: <jfw@xxxxxxxxxxxxx> Sent: Saturday, December 01, 2007 6:50 PM Subject: Re: Replying directly to sender in JAWS 9 Hi Bob, That is a very good question. Of course, I have no way of checking thatfor Cindy now, since her E-mail address is definitely in my address book at this point. However, I checked to make sure that your E-mail address wasn'tin my address book, then I tried using the Insert Shift r command to reply directly to you. The result was that I got the following message: "Check names dialogue. No matches found for Bob Verity. Show more names button." (end of quote)When I clicked on the "Show more names button," I got the following message:"Check names dialogue. Select who you mean by Bob Verity." (end of quote) So, it seems that this feature no longer works unless the person's E-mail address is already in your address book. Isn't that wonderful!!! Regards, Don----- Original Message ----- From: "Bob Verity" <rtverity@xxxxxxxxxxxxx>To: <jfw@xxxxxxxxxxxxx> Sent: Saturday, December 01, 2007 6:46 PM Subject: Re: Replying directly to sender in JAWS 9Don, Was Cindy's email address already in your address book? I received the same message that Cindy described, that is it prompted me to supply an email address.----- Original Message ----- From: "Don Moore" <donmoore@xxxxxxxxxxx>To: <jfw@xxxxxxxxxxxxx> Sent: Saturday, December 01, 2007 4:25 PM Subject: Re: Replying directly to sender in JAWS 9 Hi Cindy and list, I just used the Insert Shift r command to reply to this post directly to Cindy and it seems to have worked all right. Here is the reply I received from Cindy: Yes, it did. But, when I do it, I get a message saying something about select recipient and then wants me to choose from my address list. I've never seen that before when using that command. Cindy----- Original Message ----- From: "Don Moore" <donmoore@xxxxxxxxxxx>To: "Cindy Handel" <cindy425@xxxxxxxxxxx> Sent: Saturday, December 01, 2007 5:18 PM Subject: Re: Replying directly to sender in JAWS 9 Cindy, I just tried the Insert Shift r command with JAWS 9 on your post. Did it work? Don----- Original Message ----- From: "Cindy Handel" <cindy425@xxxxxxxxxxx>To: "JFW" <jfw@xxxxxxxxxxxxx> Sent: Saturday, December 01, 2007 2:17 PM Subject: Replying directly to sender in JAWS 9----- Original Message ----- From: "Cindy Handel" <cindy425@xxxxxxxxxxx>The feature of insert shift r to reply directly to a sender doesn't seem to work in JAWS 9. It says "replying to sender" when I press it, but only the sender's name shows up and OE doesn't recognize it as an email address. Has this changed? Cindy "Determine that the thing can and shall be done, and then...find the way." Abraham Lincoln -- JFW related links: JFW homepage: http://www.freedomscientific.com/ Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com JFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxxTo: "JFW" <jfw@xxxxxxxxxxxxx> Sent: Saturday, December 01, 2007 2:17 PM Subject: Replying directly to sender in JAWS 9The feature of insert shift r to reply directly to a sender doesn't seem to work in JAWS 9. It says "replying to sender" when I press it, but only the sender's name shows up and OE doesn't recognize it as an email address. Has this changed? Cindy "Determine that the thing can and shall be done, and then...find the way." Abraham Lincoln -- JFW related links: JFW homepage: http://www.freedomscientific.com/ Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com JFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx-- JFW related links: JFW homepage: http://www.freedomscientific.com/ Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com JFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx -- JFW related links: JFW homepage: http://www.freedomscientific.com/ Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com JFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx-- JFW related links: JFW homepage: http://www.freedomscientific.com/ Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com JFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfwIf you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact thelist owner at jfw-admins@xxxxxxxxxxxxxx -- JFW related links: JFW homepage: http://www.freedomscientific.com/ Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com JFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfwIf you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact thelist owner at jfw-admins@xxxxxxxxxxxxxx -- JFW related links: JFW homepage: http://www.freedomscientific.com/ Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com JFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfwIf you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact thelist owner at jfw-admins@xxxxxxxxxxxxxx -- JFW related links: JFW homepage: http://www.freedomscientific.com/Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.comJFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxxTo unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.Archives located at: //www.freelists.org/archives/jfwIf you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx
-- JFW related links: JFW homepage: http://www.freedomscientific.com/ Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com JFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx