I hope this message has helped those it meant to help. Please contact me if you seek further information.
P.S.: the sentence used is not meant to be inflammatory. This strategy has been used by software developers since computers were born. Most of these anti-virus applications, back in those days, had to produce viruses to infect every computer they could reach, and sell out the anti-virus they had themselves created, to get the headstart they sought. It's OK. That strategy has failed before (and the reason is a very simple math equation, which seemingly these folks are incapable of solving), and it will fail again, and a thousand or million years from now. I'd very much like to see them try. :-)
HTH On 8/6/2010 11:22 PM, Dorothy Ingram-Gorban wrote:
Hallo there I would think that unlikely but I do believe the post I was sentfrom the Bbcab list in Britain it is a membership list and it was about the2 law suits fs has taken out against an arizona based childrens non profitmaking organisation. Law suits lodged earlier this week, the British computer association for the Blind is normally pretty reliable, surely fs should not spend huge amounts on lawyers suing a childrens charity, wassaid no jaws software was so far found on the premises.,I wonder if they donot realise it gives a very bad impression better they spend any money onmaking a good product not enriching lawyers dorothy.----- Original Message ----- From: "Farfar Carlson" <dgcarlson@xxxxxxxxxxxxx>To: <jfw@xxxxxxxxxxxxx> Sent: Friday, August 06, 2010 4:44 PM Subject: Re: Freedom Scientific introduces bugs intentionally! Zdenek, I agree that the statement is almost meant to be inflammatory.You wrote: "I believe that they are leaving eloquence instead of focusing onusing the realspeak voices..."Just to clarify, did you mean that they are moving away from Eloquence andwill instead push to use RealSpeak voices? I'd not be happy with using only RealSpeak for my day-to-day work. Dave----- Original Message ----- From: "Zdenek Vopat" <zdenekvopat@xxxxxxxxxxxxxxxxx>To: <jfw@xxxxxxxxxxxxx> Sent: Friday, August 06, 2010 07:48 Subject: Re: Freedom Scientific introduces bugs intentionally! that's a pretty strong claim to make. In any rate I believe that they are leaving eloquence instead of focusing on using the realspeak voices that you can download for free, so perhaps that may explain the issue. Zdenek ----- Original Message ----- From: "Devona" <djasister@xxxxxxxxxxxxxx> To: <jfw@xxxxxxxxxxxxx> Sent: Friday, August 06, 2010 4:31 PM Subject: Re: Freedom Scientific introduces bugs intentionally!Did they fix it? -------------------------------------------------- From: "Armond" <armond1980@xxxxxxxxx> Sent: Friday, August 06, 2010 8:19 AM To: <jfw@xxxxxxxxxxxxx> Subject: Freedom Scientific introduces bugs intentionally!Hi, all, Many of you might find the following email exchange between a friend of mine and Freedom Scientific's Jonathan Mosen shocking or, rather, frustrating. Basically, it describes a Unicode-related bug in newer releases of JAWS 11 which later turned out to be an intentional move on the point of Freedom Scientific to get users to purchase a certainright-to-left language pack from a dealer--at a higher cost--though thisis against the spirit of the Unicode feature. Here's my friend's message--note that he himself doesn't have a blog or venue to voice hisconcerns and isn't interested in pursuing that line of action either forvarious reasons, so I'm doing that on his behalf and on the behalf of those who have been affected: ------------ Hello Jonathan, Please forgive me for sending you this message. The following bug is so serious that I decided to notify you as I don't know to which FreedomScientific employee it should be sent. This affects the latest JAWS 11 update. As you know, each unicode symbol or character has a value in hex. Forinstance, the Persian or Arabic character "?" ("Alef") has the followingvalue: U+627.Now JAWS 11 interprets hex values in the form of the correct value minus1. That is, for instance, the letter "Alef" with the value of U+627 is read is "Yaa hamzeh" which has the hex value of U+626. That's quite strange, but the bug indeed affects all unicode symbols modified in Eloq.sbl! This means that I can't use the Eloquence engine to type or read characters in Persian and Arabic because what I type or whatever the cursor points to will be read as something else by JAWS 11.0.1447. Would you please inform JAWS developers about this bug? I don't want to downgrade to the previous JAWS 11 release. All the best, Amir ------------ My friend's second message: ------------Just as a follow-up to my previous message, this bug affects the behaviorof NumPad5 in a slightly different way. That is, if NumPad5 is pressed once on a Unicode character which has a certain value in Eloq.sbl, JAWS incorrectly reports that character in the form of the actual Unicode valueminus 1. However, if NumPad5 is pressed twice on a Unicode character for its phonetic representation, JAWS incorrectly reads it in the form of theactual Unicode value plus 1. Just thought I'd pass this finding, too. Best, Amir ------------ Jonathan's reply: ------------ Hi Amir, the issue you've advised me of is actually a design change in JAWS. If you could please let me know your serial number, we'll look at your situation further and see if there's anything we can do for you. Jonathan ------------ My friend's reply: ------------ Hi Jonathan, That's a bit strange because the JAWS online help still indicates thatUnicode symbols can be added for engines like Eloquence which support it. Eloq.sbl is mentioned, too. At any rate, am I correct in assuming that inthe future it would be impossible to use Eloquence to read and type modified Unicode symbols and get correct feedback? May I ask why this decision has been made?As I live in a country which is now under various sanctions, I can't usecredit cards or PayPal to pay for any app including JAWS, so I have to use it in demo mode. The only exception to this is, as you know, use apps Itest. On the other hand, I heavily depend on JAWS for reading and writing Persian letter by letter, using my modified Eloq.sbl file in combinationwith Eloquence, because Persian doesn't have a TTS engine. Would it be possible to kindly make changes to the status quo? Best, Amir ------------ Jonathan's reply: ------------ Hi Amir, JAWS now requires a language processor to work with Arabic and Hebrew correctly. This can be sourced from our Arabic distributor Medialog - http://www.medialog.ws Hope this helps. Jonathan ------------ My friend's final reply: ------------ Hi Jonathan,Thanks for the note regarding the Arabic distributor of FreedomScientificproducts. However, following the URL which you provided results in the display of a webpage with an error message, regardless of the browserused, indicating that the page cannot be displayed. Do you happen to havea download link for that language processor? As I badly need the processor, your help would be greatly appreciated. For your information, I'm pasting the error message which is apparently in both French and English below. Medialog Accessibilities 404 - Fichier ou répertoire introuvable. frame Erreur de serveur 404 - Fichier ou répertoire introuvable. La ressource que vous recherchez a peut-être été supprimée, renommée ou est temporairement indisponible. 404 - Fichier ou répertoire introuvable. frame end The page cannot be found frame The page cannot be found The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.--------------------------------------------------------------------------------Please try the following: . Make sure that the Web site address displayed in the address bar of your browser is spelled and formatted correctly. . If you reached this page by clicking a link, contact the Web site administrator to alert them that the link is incorrectly formatted. . Click the Back button to try another link. HTTP Error 404 - File or directory not found. Internet Information Services (IIS)--------------------------------------------------------------------------------Technical Information (for support personnel). Go to Microsoft Product Support Services and perform a title search forthe words HTTP and 404.. Open IIS Help, which is accessible in IIS Manager (inetmgr), and search for topics titled Web Site Setup, Common Administrative Tasks, and AboutCustom Error Messages. The page cannot be found frame end Best, Amir ------------ Now, do you think this intentionally-introduced bug, which affects certain right-to-left languages, shouldn't be addressed in JAWS 12? Interestingly, even the first iterations of JAWS 11 didn't exhibit this bug, but itslater releases do. I sincerely hope Freedom Scientific address that moreresponsibly without thinking about the extra copies it might sell to those who do not even need an Arabic or Hebrew TTS engine to read individual right-to-left languages. This is like getting Windows users in certain countries to purchase localized releases of Windows just to be able to read and write in their own native languages. BTW, if you can remember, my friend Amir has been behind the Symbian-oriented MobileSpace blog and also participates in beta testing certain accessibility-related products for the visually impaired. Best regards, Armond -- JFW related links: JFW homepage: http://www.freedomscientific.com/ Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com JFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message tojfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.Archives located at: //www.freelists.org/archives/jfw Alternative archives located at: http://n2.nabble.com/JAWS-for-Windows-f2145279.htmlIf you have any concerns about the list, post received from the list, orthe way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx-- JFW related links: JFW homepage: http://www.freedomscientific.com/ Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com JFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw Alternative archives located at: http://n2.nabble.com/JAWS-for-Windows-f2145279.html If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx$U«zVyÙbzK hhTêZ?èm¶YÿÃç?¢k?éí?øor?¿IÊâ¦Ø§,f¢-)à-+-?Ûiÿùb²Û-.èÝ.Ê&þX¬¶)ß¡È"þÇ+S>h,¶©?+az7ar??bâ²Ø§²ÚîrبzÄè¦<-jg¬±¨¶yúèsØb²f¢-)à-+-±éÝjg¬±¨¶^ß·ª¹ë-~·z-+-²SàÂ+a¶°¢·nzË>±Êâm觶¬¹¸ÞrÙb?à+r¯zÉhq«^u«a¶Úÿ0~·z-+-²SàýªÜ?+Þ³øßÀmz¹Ú¶+Þj·!S÷¬-?µçZ¶m§ÿçÚv>nWo¢oÉdY¢µ¢?Ú0±ýµã?»öf"?ò¢èZ½æ§ÉÊ'qê籦èºÛazX¬¶s,¶·oz+ÞuúèsØ^-+-¢»a{²¶¥SËb±·¢zî?Ú'¢Úh²Ûazkh¶¥SËQjØ^Ê'µ§-¶¥SËhÂw«jØßÁ§fS{ç¥SËl -- JFW related links: JFW homepage: http://www.freedomscientific.com/ Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com JFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw Alternative archives located at: http://n2.nabble.com/JAWS-for-Windows-f2145279.htmlIf you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact thelist owner at jfw-admins@xxxxxxxxxxxxxx--------------------------------------------------------------------------------No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.851 / Virus Database: 271.1.1/3054 - Release Date: 08/06/10 08:37:00 -- JFW related links: JFW homepage: http://www.freedomscientific.com/Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.comJFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxxTo unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.Archives located at: //www.freelists.org/archives/jfwAlternative archives located at: http://n2.nabble.com/JAWS-for-Windows-f2145279.htmlIf you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx
-- JFW related links: JFW homepage: http://www.freedomscientific.com/ Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com JFW List instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw Alternative archives located at: http://n2.nabble.com/JAWS-for-Windows-f2145279.html If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx